ヘッダーイメージ 本文へジャンプ
ポーランド ArtHobby社 http://www.ArtHobby.pl

コリブリCOLIBRIなどでお馴染のポーランドはアートホビー社のグライダーです。
ほとんどの機体の主翼は、発泡スチロールコアにクロポプラ材貼りで木目のとても奇麗な機体です。
表示する重量は、部品単体での重量とお考えください。
在庫以外の表示価格はすべて参考価格となります。

ArtHobby社製のサーボカバー(別売)はこちらです。→バッテリー他
その他補修部品もお取り寄せいたします。

在庫ありと表示のある機体が在庫品で他はお取り寄せとなります。
※在庫変動しますのでお問合せください。 (一番下に在庫一覧あり)
※ご予約いただく機体の価格は、その都度変動いたしますのでお問合わせください。
※表示価格に別途消費税掛かります。


                                     メール:info@linkage.jp

キット内容(写真はBOAR-2m)                   エルロン・サーボ取付例、主翼はラッカー仕上げ

                                    ※サーボカバーは別売りです。

主翼ジョイント部(加工済み断面)                主翼断面(エルロン付き)


キットには、英語の説明書と完成図が付いています。
加工個所は多いですが、写真が多く使われている説明書で分かりやすいです。

機体一覧
COLIBRI-S 1M  13,400円 在庫あり
COLIBRI-V 1M  12,800円 在庫あり

スロープ・ハンドランチ機

80%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span1000mm
Length 750mm

Wing area14.11 dm2

Glider weight128g

Wing profileHN1033 modified


写真はVです。
Mosquito class glider, specially dedicated for small fields,
slopes and light lift conditions.
Suitable for sling shot launching method.

Receiver:4CH or 6CH
Ailerons servos:2 ea. HS-45HB or similar
Elevator/Rudder:1 or 2 ea. HS-45HB, HS-55 or similar
Battery:300mAh, 4.8V or similar

Gamma-EV 1.2M  13,900円  
モーターグライダー

 

85%RTF、FRP胴体、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span1200mm
Length 775mm

Wing area15.9 dm2

Glider weight154g

Wing profileHN1033 modified







The Gamma-EV is a 85% RTF, High Performance, Super Light Weight electro-glider. The latest development of small, light weight, powerful brushless motors like the ART-500 made possible to create this super light weight electro-glider. The Gamma-EV flying weight is approx. 350 grams (~12.2 oz.) It features the HN1033 airfoil that was specially modified for this sailplane, the benefit of that are superb thermal abilities and very low stall speed. Gamma wing also could be built as polyhedral wing if desired by the builder.
Features:
- Composite fuselage made of few layers of light fiber glass with glass roving and carbon fiber reinforcements for extra strength.
- Removable canopy for rapid access to the radio gear.
- V-shaped wing saddle with molded in nuts for the wing mounting srews and.
- V-shaped saddle for V-tai.
- Wing cores precision cut from high density white polystyrene foam, and the black poplar veneer skins bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
- Light weight tail made from balsa is finish sanded, and has pre-hinged control surfaces.
Kit contains: model components, plans, step by step instructions, and all necessary hardware.


AGENA-EV 1.5M  17,000円  
モーターグライダー

 

80%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span1500mm
Length 1000mm

Wing area21.2 dm2

Glider weight245g

Wing profileHN1033 modified







The Agena-EV is a 85% RTF, High Performance, Super Light Weight electro-glider. The latest development of small, light weight, powerful brushless motors like the ART-500 or ART-1000 made possible to create this super light weight electro-glider. The Agena flying weight is approx. 510 grams (17.6oz.) It features the HN1033 airfoil that was specially modified for this sailplane, the benefit of that is wide speed rang and exceptionally low stall speed. The Agena wing also could be built as polyhedral wing if desired by the builder.
features:
- composite fuselage pod is made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength. It has removable canopy for rapid access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing mounting bolts.
- tapered tail boom is made of carbon fiber/glass composite.
- wing cores are precision cut from white polystyrene foam, and the black poplar veneer is
bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
- light weight tail made from balsa is finish sanded, and has pre-hinged control surfaces.
Kit contains: model components, plans, step by step instructions, and all necessary hardware.

BOBOLINK-DL 1M  13,800円
SAL、ディスカスランチ機

80%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span1000mm
Length
780mm

Wing area14.0dm2
Glider weight137g

Wing profileHN1033 modified



Discus launch version of the Colibri glider.
Equipped with a balsa glass reinforced removable horizontal stabilizer. Its wing could also be built as a polyhedral version.

ZUNI-DL 1.2M  15,500円 
SAL、ディスカスランチ機
 

80%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span1200mm
Length 800mm

Wing area15.9 dm2

Glider weight165g

Wing profileHN1033 modified




Discus launch version of the Zuni glider. Equipped with a balsa glass reinforced horizontal stabilizer and elevator. Its wing could also be built as a polyhedral version.

ZUNI-S 1.2M  15,100円
スロープ、ハンドランチ機


80%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span1200mm
Length 790mm

Wing area15.9 dm2

Glider weight156g

Wing profileHN1033 modified




Class glider specially dedicated for small fields,
slopes and light lift conditions. Suitable for sling shot launching method.

ZUNI-V 1.2M  14,500円 在庫あり
スロープ、ハンドランチ機

 

80%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span1200mm
Length 790mm

Wing area15.9 dm2

Glider weight154g

Wing profileHN1033 modified




Class glider specially dedicated for small fields,
slopes and light lift conditions. Suitable for sling shot launching method.

Tigra 1.4M  17,100円  在庫あり
スロープ・ハンドランチ機

80%RTF、FRP胴体、
発泡スチロールにクロポプラ貼りの主翼、

Wing span1420mm
Length 635mm

Wing area23.7 dm2

Glider weight250g

Wing profileJK3780 modified



Tigra 1.4M Flying Wing was specially engineered for hand launch and slope enthusiasts.
It's light flying mass and composite fuselage with vertical stabilizer makes it very rugged.
The JK3780 modified self-stabilizing airfoil was specially developed to allow superb air penetration, very wide range of speed and excellent handling.
Due to its aerodynamic efficiency when sling launched Tigra reaches very high altitudes allowing easy thermal catching and long glide time.
Due to its toughness, good handling characteristics and wide range of speed Tigra is also an excellent slope glider.

HYPER-DL 1.5M   19,300円
SAL、ディスカスランチ機


80%RTF、FRPポット、カーボンテールパイプ
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span1500mm
Length 975mm

Wing area21,2 dm2

Glider weight230g

Wing profileHN1033 modified


Discus launch version of the Hyper glider, good trainer.
Equipped with a balsa glass reinforced removable horizontal stabilizer. Its wing could also be built as a polyhedral version.

HYPER 1.5M   17,400円
スロープ機


80%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span1500mm
Length 935mm

Wing area21.2 dm2

Glider weight220g

Wing profileHN1033 modified




Slope and flat terrain glider with a wide range of speed,
good thermal abilities, aerobatic.
Suitable for sling shot launching method. With the option of building its V-tail removable.

HYBRID-DL 1.5M  19,900円
SAL、ディスカスランチ機


80%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span1500mm
Length 1033mm

Wing area20.5 dm2

Glider weight225g

Wing profileJK7010 modified




Competition discus launched glider. Equipped with a balsa fully laminated vertical stabilizer, rudder,
and removable glass reinforced horizontal stabilizer.

POLY 1.5M  17,900円 サーマル機 在庫あり

80%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span1500mm
Length 925mm

Wing area21.2 dm2

Glider weight225g

Wing profileSD7080 modified




Thermal glider for small fields, low stall speed,
especially suitable for low lift conditions, good trainer.

SKUA 1.5M  20,500円 スロープ機
在庫あり

80%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span1500mm
Length 1020mm

Wing area21.1 dm2

Glider weight240g

Wing profileMH32/30 modified




Slope glider with a wide range of speed, good thermal abilities, aerobatic.
Suitable for sling shot launching method. With the option of building its V-tail removable.

FALCO-V 1.5M  20,400円 スロープ機
FALCO-C 1.5M  21,000円 

80%RTF、FRP胴、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span1500mm
Length V:895mm、C:920mm

Wing area24.8 dm2

Glider weight:V:290g、C:300g

Wing profileHN1033 modified




Slopes and flat terrains glider, a wide range of speed, aerobatic.
Suitable for sling shot launching method.
With removable tail that also could be attached permanently.

SKY-C 1.7M  25,400円 
SKY-V 1.7M   23,500円

モーターグライダーVer.
SKY-EV 1.7M  22,400円 
SKY-EC 1.7M  24,200円  

80%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span1700mm
Length V:1040mm、C:1080mm

Wing area23.8 dm2

Glider weightV:310g,C:325g

Wing profileSD7080 modified




Thermal glider for flat terrain with low stall speed, especially suitable for low lift conditions, good trainer.
Equipped with 3-segment wing for easy storage and transportation.
It has balsa fully laminated tail with removable horizontal stabilizer.

NEW FIDELITY-E 2M   28,000円
モーターグライダー

85%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span2000mm
Length 1070mm

Wing area28.52dm2

Glider weight470g

Wing profileOP0830 modified


The Fidelity-E is a 85% RTF, High Performance - Ultra Light Weight electro-glider. The latest development of small, light weight, powerful brushless motors like the ART-500 made possible to create this super light weight electro-glider. The Fidelity-E flying weight is approx. 480 grams (~16.8 oz.) It features the OP0830-modified airfoil that was specially modified for this sailplane, the benefit very wide speed rang, penetration, excelent thermal abilities and low stall speed.
Features:
- composite fuselage pod is made of few layers of light fiber glass with glass roving and carbon fiber reinforcements for extra strength. It has removable canopy for rapid access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing mounting bolts.
- tapered tail boom is made of carbon fiber/glass composite.
- wing cores are precision cut from white polystyrene foam, and the black poplar veneer is
bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
V-tail made from balsa has pre-hinged control surfaces is fully laminated for strength and stiffness.

SKY-V 2.0M  23,800円 サーマル機
在庫あり

SKY-C 2.0M  26,300円  〃

モーターグライダーVer.
SKY-EV 2.0M  24,900円 
SKY-EC 2.0M  27,500円 

80%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span2000mm
Length V:1070mm、C:1110mm

Wing area31.2 dm2

Glider weightV:345g,C:360g

Wing profileSD7080 modified




Thermal glider for flat terrain, low stall speed, especially suitable for low lift conditions on the slope.
Equipped with 3-segment wing for easy storage and transportation.
Its has a V-tail with option of making it removable.

NEW SERENA 2M   28,900円
スロープ&サーマル機

80%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span2000mm
Length 1290mm

Wing area30.08dm2

Glider weight470g

Wing profileOP0830 modified





Serena is a 2-meter class competition sailplane. Also good slope performer in light to moderate wind conditions. It has wide envelope of speeds, excellent air penetration and superb thermal characteristics. It has a double-trapezoid, tapered wing with built-in washout for tip-stall resistant flight characteristics, and low drag. It features OP0830C airfoil specially modified for this sailplane. Serena-s wing could be built with aileron and flaps, with ailerons only or as polyhedral wing if desired by the builder.
Model is equipped with very durable reinforced glass composite pod and very light but strong Carbon-Glass composite tail boom. The glider tail is made with selected balsa wood with pre-hinged elevators and is removable, mounted with 2-M2 screws.
Serena is a fast assembling, high quality model enjoyable to fly.

TIMON 2M  23,900
スロープ機
 

80%RTF、FRP胴、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span2000mm
Length 950mm

Wing area33.74dm2

Glider weight370g

Wing profileHN1033 modified





Timon 2M has very wide envelope of speeds and superb thermal
characteristics, perfect for slope flying in moderate to light lift
conditions.
It features a double-trapezoid, tapered wing based on HN1033 thin airfoil that was specially modified to allow superb air penetration, excellent handling and extra long glide time.
It also has a built-in washout for tip-stall resistant flight characteristics, and lower drag.
Its light flying mass and one piece composite fuselage construction makes it very rugged
Timon is well suited to be the FIRST slope glider due to its toughness and good handling characteristics.

BOAR  2M   23,600円 スロープ機
BOAR-C  2M  25,300円
BOAR-RES  2M   25,300円

80%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span2000mm
Length 1010mm

Wing area33.74dm2

Glider weight360g

Wing profileHN1033 modified




A versatile glider for slope and flat terrain with a wide range of speed, good for low
lift conditions. Equipped with 3-segment wing for easy storage and transportation.
Its has a V-tail with option of making it removable. Recommended for high start
launching.

VELVIA-FC  2M   27,400円
VELVIA-FV  2M   26,700円
スロープ・サーマル機

80%RTF、FRP胴、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span2000mm
Length 1120mm

Wing area37.48dm2

Glider weight555g

Wing profileSD7037 modified




Sturdily built, 2-meter Class glider with good thermal abilities in different weather conditions, good trainer.
Equipped with 3-segment wing for easy storage and transportation that could be built with ailerons and flaps
or with ailerons only. With removable balsa V-tail that also could be attached permanently.

NEW!
ENDURA  2.5M  35,300円
モーターグライダー 在庫あり


85%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span2500mm
Length 1300mm

Wing area37dm2

Glider weight640g

Wing profileOP0830 modified




Ultra Light weight thermal electro-glider suitable for low lift conditions. Glider wing is based on specially modified PO0830C airfoil, benefits of that are extended thermal duration time in very low lift conditions and wide range of speed.
Its Classic tail and wing equipped with spoilers, provides very crisp control and allows to make short precision landings.
Removable horizontal stabilizer and 3-segment wing allows easy storage and transportation.​


JK.THERMIC-V   2.5M   26,900円
サーマル機 在庫あり
THERMIC-RES 2.5M  29,900円
ラダー機


80%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span2500mm
Length 1160mm

Wing area40.24dm2

Glider weight476g

Wing profileHN1033 modified



A versatile light weight thermal glider for flat terrains and slopes witha wide range of speed, especially suitable for low lift conditions.
Recommended for high start launching. Equipped with aileron wing
3-segment design for easy storage and transportation. Its has
a V-tail with option of making it removable.


SIERRA   2.5M   30,500円
F3F・スロープ機 

80%RTF、FRP胴、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span2500mm
Length 1230mm

Wing area47dm2

Glider weight792g

Wing profileRG15 modified




A versatile slope glider with a wide range of speed, good thermal abilities in different weather conditions and fully aerobatic.
Equipped with 3-segment wing for easy storage and transportation that could be built with ailerons and flaps or with ailerons only.
It has removable veneer sheeted solid foam core V-tail that also could be attached permanently.

SERENITY   2.5M   34,600円
F3F・スロープ機 在庫あり


SERENITY-EV 2.5M   34,600円
モーターグライダーVer.


80%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span2500mm
Length 1350mm

Wing area48.6dm2

Glider weight800g

Wing profileMS1.8/9 modified




Competition F3F Class slope glider, sturdily built with a wide range of speed, fully aerobatic. Equipped with 3-segment wing for
easy storage and transportation that could be built with ailerons and flaps or with ailerons only. It has removable veneer sheeted
solid foam core V-tail that also could be attached permanently.

ORION-V 2.5M  28,000円 スロープ
在庫あり
ORION-C 2.5M  31,700円 スロープ
在庫あり
モーターグライダーVer.
ORION-EV 2.5M  28,600円

ORION-EC 2.5M  31,700円

80%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span2500mm
Length V:1390mm、C:1450mm

Wing area37.4 dm2

Glider weight:V:590g、C:615g

Wing profileSD7080 modified




Orion-V is very light weight thermal sailplane with flying weight approx. 770 grams (27 oz.)
The wing is based on SD7080 high lift airfoil that was specially modified for this sailplane, the benefit of that are excellent thermal abilities with very wide speed range.


Odyssey 2.7M - flaps version
41,200円  在庫あり
ODYSSEY-RES  2.7M  41,200円
ラダー機 在庫あり
ODYSSEY-EC  2.7M  41,200円
モーターグライダー 在庫あり
サーマル・スロープ機


80%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
尾翼はマイクログラス仕上げ済み
ワイヤーリンケージ他部品付属

Wing span2700mm
Length 1470mm

Wing area39.1dm2

Glider weight660g

Wing profileSD7080 modified




The Odyssey flying weight is approx. 850 grams (29.8 oz.)
It features SD7080 airfoil that was specially modified for this sailplane, the benefits of that are extended thermal duration time in very low lift conditions and wide range of speed.
Odyssey wing could be built flat with out polyhedral bends if desired by the builder.


Vortex  2.5M  39,200円

モーターグライダーVer.
Vortex-ET  2.5M  39,200円 
サーマル・スロープ機  


80%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
尾翼はマイクログラス仕上げ済み
ワイヤーリンケージ他部品付属

Wing span2500mm
Length 1375mm

Wing area39.53dm2

Glider weight685g

Wing profileMH32/30 modified




The Vortex flying weight with out ballast is approx. 900 grams (31.6 oz.) With additional ballast of 500-700g it will reveal its full speed potential. It features the MH32/30 airfoil that was specially modified for this sailplane, the benefits of that are a very wide range of speed and good thermal abilities. Vortex wing could be built with ailerons and flaps or only with the ailerons if desired by the builder.


EVOLUTIN   2.5M   33,300円 
F3F・スロープ機 在庫あり

EVOLUTION-EV 2.5M   33,300円
モーターグライダー
Ver.


80%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
尾翼はマイクログラス仕上げ済み
ワイヤーリンケージ他部品付属

Wing span2500mm
Length 1290mm

Wing area39.53dm2

Glider weight620g

Wing profileMH32/30 modified




The latest development of small, light weight, powerful brushless motors (example ART-2000) made possible to create this super light weight electro-glider. The Evolution-EV flying weight is approx. 1170 grams (~41oz.) It features the MH32/30 airfoil that was specially modified for this sailplane, the benefit of that are very wide speed range and good thermal abilities. The Evolution wing also could be built with ailerons and flaps or only with the ailerons if desired by the builder.

IBIS   3.0M   44,600円 
サーマルグライダー


80%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span3000mm
Length 1400mm

Wing area52.0dm2

Glider weight930g

Wing profileSD7080 modified




A versatile very stable glider with great thermal abilities and a wide speed range, fully aerobatic. Recommended to be launched
with high start system or moderate power winch. Equipped with 3-segment wing for easy storage and transportation that could be
built with ailerons and flaps or with ailerons only. It has a removable veneer sheeted solid foam core, horizontal stabilizer and
rudder. Removable rudder provides easy access to the elevator servo mounted inside of the vertical stabilizer.

High Aspect 3.1M   50,800円
High Aspect-RES 3.1M   50,800円 
サーマルグライダー


High Aspect-ES 3.1M
モーターグライダーVer. 50,800円 

80%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span3100mm
Length 1630mm

Wing area53.6dm2

Glider weight860g

Wing profileSD7080 modified






A versatile very stable glider with great thermal abilities and a wide speed range, fully aerobatic. Recommended to be launched
with high start system or moderate power winch. Equipped with 3-segment wing for easy storage and transportation that could be
built with ailerons and flaps or with ailerons only. It has a removable veneer sheeted solid foam core, horizontal stabilizer and
rudder. Removable rudder provides easy access to the elevator servo mounted inside of the vertical stabilizer.

New Avatar-ET  3.4M   65,000円 
サーマル、モーターグライダー

80%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span3400mm
Length 1560mm

Wing area55.44dm2

Flying weight1600g

Wing profileSD7080 modified









Avatar 3.4M is an Ultra light weight electro-glider F5J class. It's clean low drag design provides excellent air penetration with wide range of speed and flying weight ~1600 g (~56 oz.) makes it an ultimate thermal electro-glider. This original, and very modern construction is a statement to years of experience in designing and active competition. 
The fuselage pod and vertical stabilizer are made from pre-painted, molded, composite materials (epoxy/glass-carbon-fiber).
The fuselage pod features removable canopy for easy access to radio and drive gear and is 2.4GHz friendly.
Its strong tapered tail boom is made of carbon-glass-fiber composite.
The wing cores are precision cut from special high-density white polystyrene foam and for superb strength wings have molded in carbon/glass composite spars.
The black poplar veneer is bonded to the foam with aircraft industry grade epoxy in high pressure mold for perfect airfoil fidelity and warp-free wing. Our original 3-segments wing design is very strong and convenient, precut pockets for the spoilers and internally hinged ailerons are minimizing the building time. The horizontal stabilizer with pre-hinged elevator and rudder are made from selected balsa wood and fully laminated. The removable horizontal stabilizer and 3-segment wing allows easy storage and transport flexibility.
Kit contains: 
model, plans, step by step instructions, all necessary hardware and glider name wing sticker.


New Solaris-EV  3.1M   50,000円 
サーマル、モーターグライダー

80%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span3100mm
Length 1455mm

Wing area53.2dm2

Glider weight920g

Wing profileSD7080 modified







This electro-glider could be flown on flat terrains and on the slope in light to high wind condition is capable of performing all acrobatic maneuvers. The Solaris wing features SD7080 airfoil specially modified for this sailplane, the benefits of that are very wide range of speed and excellent thermal abilities. Its flying weight is approx. 1600 grams (~56 oz.) The Solaris wing could be built with ailerons and flaps or with ailerons only if desired by the builder.
Features:
- composite fuselage pod is made of a few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength.
It has removable canopy for easy access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing screws.
- tapered tail boom is made of carbon fiber/glass composite.
- wing cores are precision cut from high density white polystyrene foam, and sheeted with black poplar veneer bonded to the foam with aircraft industry grade epoxy in high pressure molds that produce perfect airfoil fidelity and a warp-free wing.
- light weight V-tail is made of foam cores pre-sheeted with thin poplar veneer for durability, stiffness and has pre-hinged control surfaces.

New Silent-E  3.4M   64,000円 
サーマル、モーターグライダー

80%RTF、FRPポット、
カーボンテールパイプ、
発泡スチロールにクロポプラ貼りの主翼、
ワイヤーリンケージ他部品付属

Wing span3400mm
Length 1740mm

Wing area55.6dm2

Flying weight1330g

Wing profileSD7080 modified





Silent-3.4M is an Ultra light weight electro-glider F5J class. It's clean low drag design provides excellent air penetration with wide range of speed and flying weight ~1330 g (~46 oz.) makes it an ultimate thermal electro-glider. This original, and very modern construction is a statement to years of experience in designing and active competition.

The fuselage pod and vertical stabilizer are made from pre-painted, molded, composite materials (epoxy/glass-carbon-fiber).

The fuselage pod features removable canopy for easy access to radio and drive gear and is 2.4GHz friendly.

Its strong tapered tail boom is made of carbon-glass-fiber composite.

The wing cores are precision cut from special high-density white polystyrene foam and for superb strength wings have molded in carbon/glass composite spars.

The black poplar veneer is bonded to the foam with aircraft industry grade epoxy in high pressure mold for perfect airfoil fidelity and warp-free wing. Our original 3-segments wing design is very strong and convenient, internally hinged ailerons and flaps are minimizing the building time. The horizontal stabilizer with pre-hinged elevator and rudder are made from selected balsa wood and fully laminated. The removable horizontal stabilizer and 3-segment wing allows easy storage and transport flexibility.

Kit contains:

model, plans, step by step instructions, all necessary hardware and glider name wing sticker.


GOHST 1.1M  25,400円 
スロープ機 
 

高性能ARFシャーレ機、電動に改造可能

Wing span1100mm

Length560mm

Wing area18d㎡

Glider weight320g

Wing profileEH 1.0/9 modified

*一体型のため1.5mクラス以上の送料となります。


Sturdy, light weight, hollow molded slope glider capable of high speed flying, aerobatic. It can be easily converted into an electro-glider.


在庫一覧:2017.9.19 現在   -在庫あり  *在庫にない機体はお取り寄せ致します。
                     Art Hobby
1m-1.7m siz 2m-3.1m siz
COLIBRI   1m LOTUS   2m
COLIBRI-V  ○ 1m TIMON-V   2m
BOBOLINK-DL   1m TIMON-C 2m
GHOST   1.1m BOAR-V   2m
ZUNI   1.2m BOAR-C   2m
ZUNI-V   1.2m BOAR-RES 2m
ZUNI-DL   1.2m SKY-C   2m
Tigra-1.4m   1.4m SKY-V   2m
HYPER   1.5m VELVIA-VF   2m
HYPER-DL   1.5m VELVIA-CF 2m
POLY   1.5m JK.THERMIC-V   2.5m
HYBRID-DL   1.5m THERMIC 2.5m
HUSH 1.5m THERMIC-RES  2.5m
FALCO   1.5m EVOLUTION   2.5m
FALCO-V   1.5m SERENITY   2.5m
SKUA   1.5m SIERRA   2.5m
SKY-V   1.7m Orion-V   2.5m
SKY-C   1.7m Orion-C    2.5m
New Serena  2.0m Vortex   2.5m
Odyssey   2.7m
Odyssey-RES   2.7m
IBIS  3.0m
HIGH ASPECT 3.1m
HIGH ASPECT-RES  3.1m

                    Art Hobby Electro
1m-1.7m siz 2m-3.1m siz
ALPHA-EV   1.0m SKY-EC 2.0m
GHOST-E   1.1m SKY-EV   2.0m
GAMMA-EV   1.2m Odessey-EC    2.7m
AGENA-EV  1.5m Orion-EV   2.5m
AGENA-ES 1.5m Orion-EC   2.5m
SKY-EV  1.7m EVOLUTION-EV  2.5m
SKY-EC   1.7m SERENITY-EV 2.5m
New Fidelity-E  2.0m IBIS-ET   3.0m
New Endura   2.5m HIGH ASPECT-ES  3.1m
New Tigra-E  1.4m New Solaris-EV   3.1m
New Avatar-ET   3.4m
      New Silent-E   3.4m
*リストにない機種はお問合せください。
フッターイメージ